Required equipment
NoteEquipment
Water 30-40°C with cleansing liquid or detergent.Cleaning agent
Compressed air
Cleaning the fine filter (polymeric filter)
The procedure below details how to clean the fine filter, that is option 3005-2 Moist
dust filter.
Note/IllustrationAction
Remove the air filter unit.1
xx2200001827
Remove the polymeric filter element.2
Clean the filter three or four times.3
Note
Do not wring the filter to press out water.
Allow the filter to dry in one of these ways:
• Lying flat on a flat surface
• Blow with compressed air in opposite
direction of filter airflow.
4
xx2200001827
Insert the polymeric filter element to the filter
and secure with the metallic line.
5
Refit the air filter unit to the cabinet.6
Continues on next page
164 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
4 Maintenance
4.3.1 Cleaning air filter
Continued
To Next Page
Loading...
