ABB OmniCore V250XT Type B - Page 171

Removing the polymeric filter element
The procedure below details how to remove the polymeric filter element (option
3005-2 Moist dust filter).
Note/IllustrationAction
xx2200001827
Take out the polymeric filter element from
the filter.
1
Refitting the air filter
Refitting the polymeric filter element
The procedure below details how to refit the polymeric filter element (option 3005-2
Moist dust filter).
Note/IllustrationAction
xx2200001827
Insert the polymeric filter element to the
filter and secure with the metallic line.
1
Refitting the air filter
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Refit the air filter unit to the cabinet.2
Continues on next page
Product manual - OmniCore V250XT Type B 171
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
4 Maintenance
4.4.1 Replacement of air filter
Continued