ABB OmniCore V250XT Type B - Page 256

Note/IllustrationAction
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
3
xx2200001817
Removing the power supply
Note/IllustrationAction
xx2200002009
Remove the end clamp besides the
power supply with a screwdriver.
1
Continues on next page
256 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.12 Replacing the power supply
Continued