ABB OmniCore V250XT Type B - Page 277

Note/IllustrationAction
xx2200001844
Pull on the lower side of the conveyor
tracking module slightly and take out the
conveyor tracking module.
Note
The conveyor tracking module is secured
by the buckles.
Be careful with the direction of the
buckles when doing assembling/disas-
sembling work.
2
xx1900001913
Refitting the conveyor tracking module (option)
Refitting the conveyor tracking module (option)
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
1
Continues on next page
Product manual - OmniCore V250XT Type B 277
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.2.16 Replacing the conveyor tracking module (CTM)
Continued