Refitting the measurement unit
Note/IllustrationAction
xx2300001706
Refit the measurement unit on the
mounting plate and tighten the screws.
1
Put the measurement unit and mounting
plate in the box.
2
xx2300001705
Refit the screws at the front of the box.3
Reconnect any connectors disconnected
at removal.
4
Continues on next page
Product manual - OmniCore V250XT Type B 335
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
5 Repair
5.5.2 Replacing the measurement unit
Continued
To Next Page
Loading...
