ABB OmniCore V250XT Type B - Page 360

Look at the following block diagram to understand how power is connected from
incoming and forward.
Troubleshooting flowchart
Problem starting or
connecting the FlexPendant
Check LED
PC
Not lit
Troubleshoot main
computer
Green
Connection ok
Connection not ok
Repair connection
Check FlexPendant
cable
Cable
damaged
Cable ok
Check connection
A2.K5.X13 to X4
Check connector X4
Connection
not ok
Connections ok
Start FlexPendant
Problem solved
Ok
Not starting
Replace FlexPendant
Replace FlexPendant
cable
Reset the
FlexPendant
xx2300001760
Location of LEDs
Information about LEDs not yet available.
Detailed working procedure
NoteAction
See Operating manual - OmniCore.Try resetting the FlexPendant using the reset
button located next to the USB port.
1
Continues on next page
360 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
7 Troubleshooting
7.2.5 Problem starting or connecting the FlexPendant
Continued