Positions
The power unit, drive unit, and additional drive units can be placed in the following
positions in the controller:
ADU3 ADU2 ADU1
MDU
Power
Unit
1
2
345
xx2300000976
See also Application manual - Additional axes for OmniCore 3HAC082287-001.
Continues on next page
Product manual - OmniCore V250XT Type B 377
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
7 Troubleshooting
7.3.4 Troubleshooting the additional drive unit
Continued
To Next Page
Loading...
