ABB OmniCore V250XT Type B - Page 59

Note
For service activities inside the cabinet, space is needed in front of the cabinet
so the door can be fully opened.
For service activities such as cleaning and replacement of controller filters, a
free space of 500 mm is required on one side of the controller.
Min. 500 mm
xx2200001742
Product manual - OmniCore V250XT Type B 59
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.4.1 Required installation space
Continued