ABB OmniCore V250XT Type B - Page 64

Note/illustrationAction
xx2000002353
Press the holder onto the desired place.3
Hanging the FlexPendant holder with the bracket
Use this procedure to hang the FlexPendant holder on any place that can hold the
bracket, like the door of the equipment.
Tip
The bracket is included on delivery.
Note/illustrationAction
xx2000002354
Hang the FlexPendant holder to the
bracket according to the screws on the
bracket.
1
Hang the holder with the bracket to the
desired place.
2
Continues on next page
64 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.4.3 Mounting the FlexPendant holder
Continued