Location of FlexPendant connector
The FlexPendant connector is located on the cabinet door.
xx2100000829
Detaching the FlexPendant in automatic mode
Use the following procedure to detach the FlexPendant in automatic mode:
1 On the status bar, tap the QuickSet button.
2 Tap the Logout/Restart tab.
3 In the FlexPendant section, tap Detach FlexPendant.
Continues on next page
88 Product manual - OmniCore V250XT Type B
3HAC087112-001 Revision: A
© Copyright 2023-2023 ABB. All rights reserved.
3 Installation and commissioning
3.5.7 Detaching and attaching a FlexPendant
Continued
To Next Page
Loading...
