ABB PVS980-58 - Page 98

96 Parameters
151.17 FBA Par17 See parameter 151.02 FBA Par2. -/ Real
0...65535 1 = 1
151.18 FBA Par18 See parameter 151.02 FBA Par2. -/ Real
0...65535 1 = 1
151.19 FBA Par19 See parameter 151.02 FBA Par2. -/ Real
0...65535 1 = 1
151.20 FBA Par20 See parameter 151.02 FBA Par2. -/ Real
0...65535 1 = 1
151.21 FBA Par21 See parameter 151.02 FBA Par2. -/ Real
0...65535 1 = 1
151.22 FBA Par22 See parameter 151.02 FBA Par2. -/ Real
0...65535 1 = 1
151.23 FBA Par23 See parameter 151.02 FBA Par2. -/ Real
0...65535 1 = 1
151.24 FBA Par24 See parameter 151.02 FBA Par2. -/ Real
1 1 = 1
151.25 FBA Par25 See parameter 151.02 FBA Par2. -/ Real
0...5 1 = 1
151.26 FBA Par26 See parameter 151.02 FBA Par2. -/ Real
- 1 = 1
151.27 FBA par refresh Validates any changed fieldbus adapter module
configuration settings. After refreshing, the value reverts
automatically to Done.
Note: This parameter cannot be changed while the
inverter is running.
Done/ List
Done Refreshing done. 0
Configure Refreshing. 1
151.28 Par table ver Shows parameter table revision of the fieldbus adapter
module mapping file stored in the memory of the
inverter.
In format axyz, where a = major revision number; xy =
minor revision number; z = correction number.
This parameter is read-only.
-/ Data
151.29 Drive type code Shows the type code of fieldbus adapter module
mapping file stored in the memory of the inverter.
This parameter is read-only.
-/ Real
151.30 Mapping file ver Shows fieldbus adapter module mapping file revision
stored in the memory of the inverter in decimal format.
Example: Integer 263 -> 0x107 = revision 1.07
This parameter is read-only.
-/ Real
151.31 D2FBA comm sta Shows status of fieldbus adapter module
communication.
Idle/ List
Idle Adapter is not configured. 0
Exec.init Adapter is initializing. 1
Time out A timeout has occurred in the communication between
the adapter and the inverter.
2
No. Name/Value Description Def/
FbEq16/32