ABB REL650 - Page 609

Name Values (Range) Unit Step Default Description
IndicationMa09 Hide
Show
- - Show Indication mask for binary channel 9
TrigLevel10 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 10
IndicationMa10 Hide
Show
- - Show Indication mask for binary channel 10
TrigLevel11 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 11
IndicationMa11 Hide
Show
- - Show Indication mask for binary channel 11
TrigLevel12 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 12
IndicationMa12 Hide
Show
- - Show Indication mask for binary channel 12
TrigLevel13 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 13
IndicationMa13 Hide
Show
- - Show Indication mask for binary channel 13
TrigLevel14 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 14
IndicationMa14 Hide
Show
- - Show Indication mask for binary channel 14
TrigLevel15 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 15
IndicationMa15 Hide
Show
- - Show Indication mask for binary channel 15
TrigLevel16 Trig on 0
Trig on 1
- - Trig on 1 Trigger on positive (1) or negative (0)
slope for binary input 16
IndicationMa16 Hide
Show
- - Show Indication mask for binary channel 16
GUID-8702C5B9-05A3-4E61-8952-C66483FFDFE2 v3
B2RBDR to B22RBDR functions have the same Non group settings (basic) as
B1RBDR but with different numbering (examples given in brackets):
• B2RBDR: 17 to 32 (SetLED17, set LED on HMI for binary channel 17)
• B3RBDR: 33 to 48 (SetLED33, set LED on HMI for binary channel 33)
• B4RBDR: 49 to 64 (SetLED49, set LED on HMI for binary channel 49)
• B5RBDR: 65 to 80 (SetLED65, set LED on HMI for binary channel 65)
• B6RBDR: 81 to 96 (SetLED81, set LED on HMI for binary channel 81)
• B7RBDR: 97 to 112 (SetLED97, set LED on HMI for binary channel 97)
• B8RBDR: 113 to 128 (SetLED113, set LED on HMI for binary channel 113)
• B9RBDR: 129 to 144 (SetLED129, set LED on HMI for binary channel 129)
• B10RBDR: 145 to 160 (SetLED145, set LED on HMI for binary channel 145)
• B11RBDR: 161 to 176 (SetLED161, set LED on HMI for binary channel 161)
• B12RBDR: 177 to 192 (SetLED177, set LED on HMI for binary channel 177)
• B13RBDR: 193 to 208 (SetLED193, set LED on HMI for binary channel 193)
• B14RBDR: 209 to 224 (SetLED209, set LED on HMI for binary channel 209)
1MRK 506 382-UEN A Section 14
Monitoring
Line distance protection REL650 2.2 IEC 603
Technical manual