ABB REL650 - Technical Data

20.2.7.6 Technical data
SEMOD55338-1 v1
M12576-1 v9
Table 638: BIM - Binary input module
Quantity
Rated value Nominal range
Binary inputs 16 -
DC voltage, RL 24/30 V
48/60 V
110/125 V
220/250 V
RL ±20%
RL ±20%
RL ±20%
RL ±20%
Power consumption
24/30 V, 50 mA
48/60 V, 50 mA
110/125 V, 50 mA
220/250 V, 50 mA
220/250 V, 110 mA
max. 0.05 W/input
max. 0.1 W/input
max. 0.2 W/input
max. 0.4 W/input
max. 0.5 W/input
-
Counter input frequency 10 pulses/s max -
Oscillating signal discriminator Blocking settable 1–40 Hz
Release settable 1–30 Hz
Debounce filter Settable 1–20 ms
M50609-2 v7
Table 639: BIM - Binary input module with enhanced pulse counting capabilities
Quantity
Rated value Nominal range
Binary inputs 16 -
DC voltage, RL 24/30 V
48/60 V
110/125 V
220/250 V
RL ±20%
RL ±20%
RL ±20%
RL ±20%
Power consumption
24/30 V
48/60 V
110/125 V
220/250 V
max. 0.05 W/input
max. 0.1 W/input
max. 0.2 W/input
max. 0.4 W/input
-
Counter input frequency 10 pulses/s max -
Balanced counter input frequency 40 pulses/s max -
Oscillating signal discriminator Blocking settable 1–40 Hz
Release settable 1–30 Hz
Debounce filter Settable 1-20 ms
20.2.8 Binary output modules (BOM)
IP14536-1 v1
20.2.8.1 Introduction
M6938-3 v4
The binary output module has 24 independent output relays and is used for trip
output or any signaling purpose.
Section 20 1MRK 506 382-UEN A
IED hardware
846 Line distance protection REL650 2.2 IEC
Technical manual