ABB REL650 - Settings

Name Type Default Description
BO13 BOOLEAN 0 Binary output 13
BO14 BOOLEAN 0 Binary output 14
BO15 BOOLEAN 0 Binary output 15
BO16 BOOLEAN 0 Binary output 16
BO17 BOOLEAN 0 Binary output 17
BO18 BOOLEAN 0 Binary output 18
BO19 BOOLEAN 0 Binary output 19
BO20 BOOLEAN 0 Binary output 20
BO21 BOOLEAN 0 Binary output 21
BO22 BOOLEAN 0 Binary output 22
BO23 BOOLEAN 0 Binary output 23
BO24 BOOLEAN 0 Binary output 24
PID-3439-OUTPUTSIGNALS v1
Table 641: BOM Output signals
Name Type Description
STATUS BOOLEAN Binary output part of IOM module status
20.2.8.4 Settings
PID-3439-SETTINGS v2
Table 642: BOM Non group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Off
On
- - On Operation Off/On
20.2.8.5 Monitored data
PID-3439-MONITOREDDATA v2
Table 643: BOM Monitored data
Name
Type Values (Range) Unit Description
STATUS BOOLEAN 0=Ok
1=Error
- Binary output part of
IOM module status
BO1VALUE BOOLEAN 1=1
0=0
- Binary output 1 value
BO1FORCE BOOLEAN 0=Normal
1=Forced
- Binary output 1 force
BO1 BOOLEAN 0=Normal
1=Forced
2=Blocked
-
Binary output 1 status
BO2VALUE BOOLEAN 1=1
0=0
- Binary output 2 value
Table continues on next page
1MRK 506 382-UEN A Section 20
IED hardware
Line distance protection REL650 2.2 IEC 849
Technical manual