Chapter 2. System Training
4 If you entered reboot, the computer displays:
REBOOT Cold System Reboot
Rev 6.1.0
Warning!!
This program cold-boots the machine.
Please make sure all tasks are logged off and that
this is what you want to do.
Are you sure you want to reboot [Y/N]? [N]
Enter Y and press Enter to begin the process or N and Enter to end the program.
Allow the system to perform the diagnostics automatically.
5 When the computer asks which operating system to boot (Enter S, D, or #:) , enter S
and press Enter.
6 The boot process is completed
after the system monitor displays the password
screen. See the next section, PASSWORDS - SuperDOS.
IMPORTANT: No users should sign on other terminals until the system monitor displays the password
screen. If a user signs on before the boot is complete, it will be necessary to reboot the
system again.
) REMEMBER:
A “cold” boot means to turn off the CPU and turn it back on again.
A “warm” boot means to enter the command boot or reboot from the SuperDOS prompt under a
level 7 password.
Do not sign on until after the system monitor is at the password screen.
Dimensions 14 23
To Next Page
Loading...