Activant Dimensions - Heading; Insert

Appendix D
15 The cursor returns to
SEQ where you can select another sequence to delete or
end this procedure by entering “.” (period) and pressing Enter.
16 You are returned to the options in Step 3 (
FUNCTION (C D E H I V X ?)).
H. Heading
17 Enter H to change the menu heading.
18 The computer displays:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DM10110 === REPRINT TRANSACTIONS ===
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
ENTER NEW MENU HEADING:
Enter up to 40 characters for the new heading or press Tab to leave
unchanged. Dimensions uses all capital letters for the standard menu
headings.
19 You are returned to the options in Step 3 (
FUNCTION (C D E H I V X ?)). You may
wish to view the menu with the new heading.
I. Insert
20 You should view the menu before changing it. Enter V and press Enter.
21 The computer displays the selected menu. For example:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DM10110 === REPRINT TRANSACTIONS ===
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
1 Reprint Transaction P 100 DS04080
2 Reprint History Trans by Range P 100 DS04080B
FUNCTION (C D E H I V X ?):
Press Enter when the computer displays NO MORE RECORDS. The computer
displays the options again (
FUNCTION (C D E H I V X ?)). Determine the sequence
number you need to insert. The menu option will be inserted
before the
sequence number you select.
22 Enter I for insert and press Enter.
23 The cursor moves to
SEQ. Enter the sequence number before which to insert
a new menu option. Or if you are adding an option at the end of the menu,
enter the next sequence number.
Dimensions 14 459