Appendix D
12 The computer asks:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DM10110 === REPRINT TRANSACTIONS ===
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
DELETE ENTIRE MENU (Y/N):
Enter one of the following options:
Y CAUTION! Enter Y only if you are sure you wish to delete the entire
menu. The computer immediately deletes the entire menu from the
menu file and displays:
THIS MENU HAS BEEN DELETED
Press Enter to acknowledge this message and return to Step 1.
N Enter N if to delete specific sequence numbers from the selected
menu or end the delete option. Continue to Step 13.
13 If you entered N above, the cursor moves to
SEQ. For example:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DMTEST DIMENSIONS TEST MENU
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
Enter the sequence number you wish to delete from the menu.
14 The computer displays the detail for the selected sequence number. For
example:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DM10110 === REPRINT TRANSACTIONS ===
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
2 Reprint History Trans by Range P 100 DS04080B DEL (Y/N):
FUNCTION (C D E H I V X ?): D
Enter Y if you wish to delete the displayed menu option. The computer
deletes it immediately, renumbering any following menu options
automatically. Or enter N to leave the option on the menu.
458 Dimensions 14
To Next Page
Loading...