Appendix A
Printers
OKIDATA 292
Menu Selection
With the printer’s “Menu Select” mode, you can print a list or “menu” of
features available and then select the ones you want to change using the
printer’s control panel buttons. These features remain selected even if you
turn your printer off.
Function: Action:
Enter Menu Select mode Hold down FORM FEED button while turning on printer.
Print current menu Press SELECT button.
Move to next option Press FORM FEED button.
Move to previous option Press LINE FEED button.
Change a selection Press SELECT button.
Exit Menu Select mode Press TOF SET button.
Standard Printer Settings (Okidata emulation)
Parameters shown in bold type can be either response.
PRINT MODE UTILITY
CPI 10
LPI 6
EMPHSZD N
ENHNCD N
DBL WIDTH N
DBL HGHT N
SUP / SUB SHRNK
ITALICS N
CHR SET NORM
PROP SPC N
LANG SET 0
7 / 8 BIT FMT 8
GRAPHICS 7 / 8 BIT 8
GRAPHICS UNIDR N
PG LENGTH 11
COLOR BLK RIBBON
SEL DL CHR SET# 0
PRNT DEL CODE N
DC1 / 3 EFF Y
SKI OVER PERF N
AUTO LF N
PPR OUT OVRD N
PRNT REG 0
DATA BITS 7 / 8 8
PRTCL RDY/BSY / XON/XOFF
DIAG TEST N
BUSY LINE SSD- / DTR
BAUD RATE 19.2 / 9.6
DSR SGNL INVALID
DTR SIGNL RDY ON PWR UP
BUSY TIME .2
FORM TEAR OFF 11/12”
AUTO LOAD Y
Dimensions 14 377
To Next Page
Loading...