Appendix D
Part 3: Error Messages
System Failures
System failure messages typically occur when bringing the system up and
there is some type of hardware or security discrepancy.
SYSTEM FAILURE # CAUSE COMMENTS
SYSTEM FAILURE 02 System printer not on Turn printer on & on-line.
Supercoder not connected Make sure that the Supercoder
Is connected tightly on first
parallel port.
SYSTEM FAILURE 03-18 Security missing in CONFIG file Call Dimensions support.
Exception Errors
Exception errors occur when software attempts to overwrite its allocated
memory. Exception errors stop the task that caused the exception and
displays an error message on the terminal of that task. Exception errors
occur very rarely but if they start occurring frequently it can denote a system
problem.
EXCEPTION ERROR # CAUSE COMMENTS
EXCEPTION ERROR 02 Power, memory Reboot system. Call Dimensions
support if getting frequent
exception errors.
EXCEPTION ERROR 06 Power, memory Reboot system. Call Dimensions
support if getting frequent
exception errors.
EXCEPTION ERROR 13 Power, memory Reboot system. Call Dimensions
support if getting frequent
exception errors.
462 Dimensions 14
To Next Page
Loading...