Activant Dimensions - Change

Appendix D
C. Change
4 You must view the menu before changing it. Enter V and press Enter.
5 The computer displays the selected menu. For example:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DM14300 === INVENTORY REPORTS ===
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
1 LISTS D 0
2 Static Data IM1 P 100 DS03031
3 Store Data (Costs/Prices) IM2 P 100 DS03032
4 Delivery & Weight Info IM1 P 100 DS03033
5 Associated Items P 100 DS03027
6 Multiple Units of Measure P 100 DS03029P
7 D 0
8 VALUATION D 0
9 Item Valuation Report P 100 DS03320
10 G/L Item Value Reconciliation P 100 DS03321
11 G/L Group Value Reconciliation P 100 DS03322
12 D 0
13 D 0
14 STOCK STATUS D 0
15 Stock Status Reports M 100 DM14330
MORE (Y/N):
If there are more lines of the menu to display, the computer asks: MORE (Y/N).
Enter Y if you wish to view more lines (the next page). Or enter N to not
view more lines but get to the options
FUNCTION (C D E H I V X ?). If the menu
fits on one screen, the computer displays
NO MORE RECORDS. Press Enter to
acknowledge this message and get to the options
FUNCTION (C D E H I V X ?).
6 The first column contains the sequence number of the menu. Sequence
numbers keep the menu in order. Observe which sequence number needs to
be changed. Enter C to change one or more of the menu options. Only one
sequence can be changed at a time.
7 Enter the sequence number of the option requiring a change. The computer
displays it. For example:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DM14300 === INVENTORY REPORTS ===
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
4 Delivery & Weight Info IM1 P 100 DS03033
The cursor moves to the Description column. You have the following options:
Press Enter This option bypasses the field, leaving the
information intact. It is not necessary to retype all
the fields.
Enter new information See the table below, FIELD DESCRIPTIONS, for a
description of each field. Press Enter after entering
new information in a field to go to the next field.
8 After you make all the desired changes, the cursor is positioned under
SEQ.
Enter “.” (period) and press Enter to end the change mode.
456 Dimensions 14