Appendix D
Enter Y if you wish to add a new menu or N if not. If you enter Y, the
computer asks:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DM88888
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
ENTER NEW MENU HEADING:
Enter up to 40 characters for the heading of the new menu. This heading
will be displayed at the top of the screen when this menu is called. You will
then define the menu options for the new menu. Refer to the next step for an
explanation of the fields.
3 If you entered an existing menu I.D. above, the computer displays at the
bottom of the screen:
MG100 REV 1.0 MENU FILE MAINTENANCE
MENU: DM00000 === DIMENSIONS MAIN MENU ===
SEQ DESCRIPTION TYPE PRIORITY CALLS PROGRAM
FUNCTION (C D E H I V X ?):
Enter one of the following options:
C Change the selected menu. See Steps 4-9.
D Delete the selected menu. See Steps 10-16.
E End this procedure and return to the previous
screen (Step 1).
H Change the menu heading. See Steps 17-19.
I Insert entries into the selected menu. See Steps 20-
26.
V View the selected menu. You must view the menu
before changing or deleting it. See Steps 27-28.
X Cancel any changes made to the selected menu.
Enter X if you wish to cancel any changes you have
just made to the menu. No changes will be recorded.
If you were adding a new menu, it is not added to
the menu file.
Dimensions 14 455
To Next Page
Loading...