Activant Dimensions - Page 478

Appendix D
Then you will have these added options:
C Make this field changeable, viewable, with a default value
that you enter next when the computer asks
Enter Default Value.
This default value will be used for all customers being added
unless it is changed at the time of entering the customer. For
example, you can set up field
19. STORE NO with a default value
of 1 to assign all customers to store 1. It can be changed at
the time of entering customers.
V Make this field not changeable, viewable, with a default value
that you enter next when the computer asks
Enter Default Value.
This default value will be used for all customers being added
and
cannot be changed at the time of entering the customer.
For example, you can set up field
14. PO REQ with a default
value of Y to require all customers to have a PO number. It
can be changed only in
A/R File Maintenance later for a specific
customer if needed.
D Make this field not changeable, not viewable, with a default
value that you enter next when the computer asks Enter Default
Value
. This default value will be used for all customers being
added and will not be displayed at the time of entering the
customer. For example, you can set up field
10. AR GROUP with
a default value of 1 to put all customers in A/R group 1. It
can be changed only in
A/R File Maintenance later for a specific
customer if needed.
8 When you are done selecting fields, you can either press Enter through the
remaining fields or enter “.” (period) and Enter.
9 You are returned to 1. Enter Password Account. To end this procedure, press
Esc. You are returned to the previous menu.
10 Repeat for option 2,
Add/Maintain CM2 Fields.
470 Dimensions 14