Adixen ASM GRAPH - Recommended Procedure

C 200
Starting up / Switching off the leak
detector
3 /3
CYCLE IN PROGRESS
MODE:-> Normal
...
...
GB 02460 -
Edition
02 -
June
08
Recommended
procedure
To protect the internal vacuum components of the leak detector against
dust or any kind of contamination, it is
recommended to keep its inlet
blanked-off and under vacuum. Please proceed as follows before
stopping the leak detector:
 Place the blank-off flange or close the test chamber.
Start the test cycle.
Wait until the leak detector reaches the more sensitive test mode.
Make
sure that the inlet vent i s O FF .
Stop the test cycle.
Stop the leak detector.
Inlet vent C 500