Adixen ASM GRAPH - To Change User Interface Level; Which Is Your User Interface Level?

C 120
readY For cYcle
INlet: vent off
test mode:high sens
vacuum cor.: off
test mode:high sens
veNt settING:
...
vacuum cor.:
off
value: 1.00e+00
test mode:high sens
INlet: ...
date: Jan/03/2004
tIme: 09:02:48
GB 00966 -
Edition
06 -
June
08
Setting and maintenance part presentation
of the control panel
Which is your user interface
level?
In order to find out what is the
current interface level, follow the
sequence described below:
If this screen appears, your access level is
1
.
ð
One of the 4 next screens
appears
ò
If this screen appears, your access level is
2
.
ð
If this screen appears, your access level is
3
.
ð
If this screen appears, your access level is
4
.
ð
To change user interface
level
2x
Adjustment
C 110
2/ 3