Memorized graphs saving
It is possible to do a
screen
copy (.bmp) or to create a file (.txt) with
the
measures
memorized.
The
.txt file is compatible with Excel: the
separator by default is
“tab”.
Notes:
•
The
.txt and .bmp files saved correspond to the curve points
displayed on the screen:
-
To
have all the points, it is
essential
to be on the original graph
(no
zoom)
.
-
If a zoom has been done before the saving, the saving
corresponds
only to the curve points displayed in the selected
area
.
•
If the memorized graph is made up of
several successive
recordings:
-
the
“
”
cursor will indicate each change of recording on the
.bmp file
.
-
“break down n°”
message
will be indicated at the end of the last
line of each recording
.
•
If you press key while the
remote
control is
connected
to the
leak detector, the leak
detector
will be out of
order
.
To
remedy it, press and
disconnect/reconnect
the remote
control.
Material
•
A specific cable to
connect
the control panel with the PC.
Part
number
:
A461946
-
Delivered with all the leak
detectors
equipped of the "control
panel with graphic interface" option.
-
Not included in the "control panel with graphic interface"
accessory.
•
A specific software “ASM Downloader“ should be
set
in your PC
download
it:
-
either on our
internet
Address:
www
.adixen.com/Ressources/
ools
-
or from the sheet
G
800
.
•
PC
configuration:
- PC
300 MHz, 128 Mb RAM, 50 Mb hard drive,
Graphic card 800 x 600 x 256 colors.
Windows 98, Windows 2000, Windows
XP
Display the memorized graph to the screen.
To Next Page
Loading...
