Adixen ASM GRAPH - External Loudspeaker; Headphone; Headphone and Loudspeaker; Level Adjustment

C 410
Headphone and loudspeaker
4 /3
GB 00633
-
Edition 03
- June
08
The operator can connect a headphone or an external loudspeaker to
the detector.
The detector must be equipped with
the RS 232 option
Connecting B 210
Level adjustment The audio levels for the headphone or the external loudspeaker are
the
same as for the audio alarm and digital voice functions. In order
to adjust the headphone or the external
loudspeaker audio levels, you
must adjust the levels of the audio alarm and digital voice functions.
Audio alarm / Digital voice C 520
Accessories ?
Headphone
External loudspeaker
You should use the headphone connector accessory:
Sub D 9 pins Jack plug 6.35 mm mono
Accessories A 700
The manufacturer does not sell headphones. The specifications are:
• Impedance: 400/500 Ω
• Jack plug 6.35 mm (or other sizes with adaptor)
• Frequency band: 18 kHz to 20 kHz
The manufacturer does not sell external loudspeaker. The specifications
are:
The external loudspeaker has the same characteristics as the
internal louspeaker:
• Impedance: 8 Ω
• Power: 8 W