Adixen ASM GRAPH - Connecting the Detector Directly to a Printer or Another Device

B 320
Connecting the detector directly to a p r i n t e
r
or another de v i c e
GB
00216
- Edition 02 - September
04
Purpose of the printer
inter face
The Printer interface makes it possible to connect the leak detector to
a printer, an external loudspeaker or a headphone.
Location of the printer
inter face
It is a Sub D 9 pin Male connector .
B 210/211
1 2 3 4 5
6 7 8
9
Connector description
Pin # Function Communication protocol
1
Exter nal
loudspeaker
Mode
Asynchronous
2 Rx Bauds
9600
3 Tx Bits
8
4 NA Parity None
5 Ground Stop bit 1
6
Headphone Parity control None
7 R TS
8 CTS
9
Internal use only. Don’t connect it
Communication mode
description
Headphone and loudspeaker C 410
Configuration tickets are sent out.
Connection
to the printer
1 5 1 5
6 9 6
9
Leak detector
Printer serial
por t
1 /5