Neutral gas purge and inlet vent
connection
Products
concerned
(1)
Requires
a special inlet vent kit installation ( A
700
).
(2) Male
connector
delivered with the leak detector.
(3) Male
connector
not delivered with the leak detector.
Model : Male
connector R
1/4
BSP
T
.
Connection
to the
leak
detector
Neutral gas
purge
ASM
182/192
TD+
ASM 192
T2D+
ASM 142
D
Neutral gas
purge
ASM 122
D
Inlet
vent
B
210
/
B
211
If no purge
system
is
connected
to
connector
which is
connected
to
detector, the neutral gas purge is to the ambiant air and
maintened
an
air flow inside the leak detector.
Even
if the leak
detector
does not
use
the neutral gas purge, the
male
connector
delivered with the leak
detector
should always be
connected
to leak detector.
The
inlet vent
status
(open or
closed)
depends on the
parameters set
by the operator (
C
500
).
If no inlet vent
system
is
connected,
the inlet vent is
connected
to the
ambiant
air
.
1/2
To Next Page
Loading...
