28
Test results are saved as les that are stored in Cable folders. Cable folders are organized into
Route, Job, and Drive folders as shown below.
• Use
arrows to navigate up/down the list of folders and les.
• Use arrows to expand/contract the selected Drive/Folder/Job/Route/Cable.
• To open, navigate to the desired test result, and then press View
A
or Enter key.
• Use the Tools
B
menu within the Results Manager to create or delete Jobs, Files, Folders and
copy test data from Internal drive to USB drive.
Results Manager
Note: Folders are not required to store results.
FOLDER
DRIVE
JOB
ROUTE
CABLE
FIBER NUMBER
This eld displays path/
name of the selected
le.
Press View to display
selected test results.
Tools menus will vary
depending on the
selected level in the le
tree structure as shown
below.
Results Manager “File Tree” Structure
JOB FOLDER
ROUTE
CABLE
TEST RESULT
Tools Menus in the File Tree Structure
In this example, ber
001 contains both OTDR
traces and ber end-face
images from both ends
of the ber.
DRIVE
A B
To Next Page
Loading...
Need help?
General
