Perform a quality control
In the operator room at the NX workstation, the DR Full Leg Full Spine image
is displayed in the Stitching pane.
Figure 134: Stitching pane
Stitching is applied based on grid markers in the stitching grid and a
correction is applied based on the alignment of the anatomical information in
the image.
The stitching parameters are displayed on the right side of the image:
Table 15: Stitching parameters
Button Parameter
Vertical correction, in respect to the stitching grid, for the align-
ment of the anatomical information in the image.
Horizontal correction, in respect to the stitching grid, for the align-
ment of the anatomical information in the image.
170 | DR 800 | Full Leg Full Spine
0392C EN 20210309 1049
To Next Page
Loading...
