Cabinets and power switch
The main electrical panel of the examination room has an electrical switch
that is used for starting and stopping the system.
Three electronic cabinets are installed in the room:
• Generator cabinet
• Positioner cabinet
• DR 800 sync cabinet
The DR 800 sync cabinet is installed on top of the generator cabinet or nearby
the NX workstation. These are the functions of the DR 800 sync cabinet:
• connection between the NX workstation and the other cabinets
• synchronization of DR detector and generator
The DR 800 sync cabinet has an on/off switch.
Related Links
Starting the System on page 108
Stopping the System on page 141
DR 800 | Introduction | 43
0392C EN 20210309 1049
To Next Page
Loading...
