Emergency stop button
If a system malfunction causes an emergency situation involving the patient,
operating personnel or any system component, activate the emergency stop
button.
• On the position controls console
• On the position controls
Figure 23: Multiple emergency stop buttons are available on the system
The emergency stop buttons are red with the word "STOP" for easy
recognition.
By pressing an emergency stop button, electric power to the remote controlled
tabletop is shut off, thus stopping all table movements.
WARNING:
The emergency stop button must be unlocked (pull the red
button) only after the cause of the hazard has been clearly
identified and eliminated.
DR 800 | Introduction | 41
0392C EN 20210309 1049
To Next Page
Loading...
