Attaching the cushion to the tabletop
To provide extra comfort for patients, a cushion can be positioned on the
examination tabletop (available only for tabletop length=2100mm).
1. Place the tabletop in the horizontal position.
2. Press firmly the Velcro strips on the tabletop foot end to fasten onto the
Velcro strips on the cushion foot end.
3. Press firmly the Velcro strips on the tabletop head end to fasten onto the
Velcro strips on the cushion head end.
Figure 174: Attaching the cushion
WARNING:
In order to ensure proper hygienic conditions the medical staff
must make sure the parts of the device that come into contact
with the patient (such as examination tabletop, tabletop and
stretcher cushions) are protected using biocompatible material
sheet.
DR 800 | Options and accessories | 257
0392C EN 20210309 1049
To Next Page
Loading...
