AGFA DR 800 - Safety Directions

Safety Directions
WARNING:
Safety is only guaranteed when an Agfa certified field service
engineer has installed the product.
WARNING:
The product must only be installed using released components
and in released configurations.
WARNING:
To avoid risk of electric shock, this equipment must only be
connected to a supply mains with protective earth.
WARNING:
Do not connect additional extensions cords or multiple power
socket outlets to the system.
WARNING:
Do not connect the equipment with anything other than
specified. Doing so may result in fire or electric shock.
WARNING:
To avoid risk of electric shock, do not remove any covers.
Changes, additions, maintenance or repairs must be carried out
by an Agfa certified field service engineer.
WARNING:
The user must not touch part of the console or the X-ray
generator, and patient simultaneously.
WARNING:
Ionizing radiation can lead to radiation injuries if handled
incorrectly. When radiation is applied, the required protective
measures must be complied with.
WARNING:
The operator and end-user must take precautions to protect
themselves against dangerous X-ray exposure when using the
DR Detector in the X-ray beam path of an X-ray source.
90 | DR 800 | Safety Directions
0392C EN 20210309 1049