Agilent Technologies 1260 User Manual

108 Agilent 1260 Infinity DAD and MWD User Manual
5 Using the Detector
Special Settings of the Detector
Spectrum Settings (DAD only)
To change the Spectra settings open.
1 To change the Spectra settings select Setup Detector Signals.
2 In the section Spectrum click on the drop-down list and chose a parameter.
Table 25 on page 109 shows the possible parameters.
3 Change the Range, Step width and Threshold according to your needs.
Figure 46 Spectra Settings

Agilent Technologies 1260 Specifications

General

Brand	Agilent Technologies
Model	1260
Category	Security Sensors
Language	English