83
Agilent 1260 Infinity DAD and MWD User Manual
Agilent Technologies
5
Using the Detector
Setting up an Analysis 84
Before Using the System 84
Requirements and Conditions 86
Optimization of the System 89
Preparing the HPLC System 90
Running the Sample and Verifying the Results 99
Special Settings of the Detector 100
Control Settings 100
Configuration Settings 101
Online Spectra (DAD only) 102
Run Recovery Settings 103
Automated Run Recovery in case of temporary communication
failures 104
Manual Run Recovery in case of permanent communication
failures 106
Analog Output Settings 107
Spectrum Settings (DAD only) 108
Peakwidth Settings 110
Slit Settings 112
Margin for Negative Absorbance Settings 113
Optimizing the Detector 113
Special Setups with Multiple DAD-MWDs 114
Two detectors of same type (e.g. G1315C/D and G1315C/D) 114
Two detectors of similar type (e.g. G1315C/D and G1315A/B) 114
This chapter provides information on how to set up the detector for an analysis
and explains the basic settings.
To Next Page
Loading...
