Agilent Technologies 1260 - Running the Sample and Verifying the Results

Agilent 1260 Infinity DAD and MWD User Manual 99
Using the Detector
5
Setting up an Analysis
Running the Sample and Verifying the Results
1 To start a run select the menu item RunControl -> Run Method.
2 This will start the modules and the online plot on the Agilent ChemStation
will show the resulting chromatogram.
Figure 41 Chromatogram with Isocratic Test Sample
NOTE
Information about using the Data Analysis functions can be obtained from the Using your
ChemStation manual supplied with your system.