244 Agilent 1260 Infinity DAD and MWD User Manual
11 Parts for Maintenance
Nano Flow Cells
Nano Flow Cells
The following kits are available:
Figure 90 on page 245 shows all parts delivered with the nano-flow cell kits.
Generic parts for both nano-flow cells:
Tab le 36 Nano-flow cell kits
Part number Comments
Semi-nano flow cell kit, 10 mm, 500 nL,
5 MPa (p/n G1315-68724)
completely assembled (includes items 1, 2, 3, 4, 10,
11, 12, 13, 14, 15, and 16)
Nano flow cell kit, 10 mm, 80 nL, 5 MPa
(p/n G1315-68716)
completely assembled (includes items 1, 2, 3, 4, 10,
11, 12, 13, 14, 15, and 16)
Item p/n Description
3 5063-6593 Fitting Screw
(for 4 mm wrench)
4 Cell ferrules are factory installed
5 5065-4422 PEEK fitting 1/32"
7 5063-6592 Litetouch ferrules LT-100, (1/32" Ferrule and SS lock ring)
8 5022-2146 Union Adjustment Tool
9 5022-2184 Union ZDV
10 G1315-45003 Torque adapter
14 G1315-84902 Handle for Clamp unit
15 G1315-84910 Clamp unit
16 0515-1056 Screw M 2.5, 4 mm lg
for cell body/clamp
17 8710-1534 Wrench, 4 mm both ends, open end
To Next Page
Loading...
