Agilent Technologies 1260 User Manual

Agilent 1260 Infinity DAD and MWD User Manual 61
LAN Configuration
4
Initialization mode selection
Initialization mode selection
The following initialization (init) modes are selectable:
Bootp
When the initialization mode Bootp is selected, the module tries to download
the parameters from a Bootp Server. The parameters obtained become the
active parameters immediately. They are not stored to the non-volatile
memory of the module. Therefore, the parameters are lost with the next power
cycle of the module.
Figure 15 Bootp (Principle)
Tab le 16 Initialization Mode Switches
SW 6 SW 7 SW 8 Init Mode
OFF OFF OFF Bootp
OFF OFF ON Bootp & Store
OFF ON OFF Using Stored
OFF ON ON Using Default
7ddie
HZgkZg
6Xi^kZ
EVgVbZiZg

Agilent Technologies 1260 Specifications

General

Brand	Agilent Technologies
Model	1260
Category	Security Sensors
Language	English