Agilent 1260 Infinity DAD and MWD User Manual 93
Using the Detector
5
Setting up an Analysis
7 For the isocratic pump, fill the solvent bottle with the mixture of
HPLC-grade bi-distilled water (30 %) and acetonitrile (70 %). For binary-
and quaternary pumps you can use separate bottles.
8 Click on the Load Method button and select DEF_LC.M and press OK.
Alternative double-click on the method in the method window. The default
LC method parameters are transferred into the modules.
Figure 36 Loading Default LC Method
To Next Page
Loading...
