Agilent Technologies 34420A - Page 120

Voltage Measurement Configuration Commands
MEASure
[:VOLTage][:DC]?
[{<
range > | AUTO | MIN | MAX | DEF}][,{< resolution > | MIN | MAX | DEF}][,(@< channel >)]
1
[:VOLTage][:DC]:RATio?
[{<
range > | AUTO | MIN | MAX | DEF}][,{< resolution > | MIN | MAX | DEF}]
[:VOLTage][:DC]:DIFFerence?
[{<
range > | AUTO | MIN | MAX | DEF}][,{< resolution > | MIN | MAX | DEF}]
CONFigure
[:VOLTage][:DC]
[{<
range > | AUTO | MIN | MAX | DEF}][,{< resolution > | MIN | MAX | DEF}][,(@< channel >)]
1
[:VOLTage][:DC]:RATio [{< range > | AUTO | MIN | MAX | DEF}] [,{< resolution > | MIN | MAX | DEF}]
[:VOLTage][:DC]:DIFFerence[{<
range > | AUTO | MIN | MAX | DEF}] [,{< resolution > | MIN | MAX | DEF}]
[SENSe:] | SENSe1: | SENSe2:
FUNCtion "VOLTage[:DC]"
FUNCtion "VOLTage[:DC]:RATio"
FUNCtion "VOLTage[:DC]:DIFFerence"
FUNCtion?
[SENSe:] SENSe1: | SENSe2:
VOLTage[:DC]:RANGe {<
range > | MIN | MAX}
VOLTage[:DC]:RANGe? [MIN | MAX]
VOLTage[:DC]:RANGe:AUTO {OFF | ON}
VOLTage[:DC]:RANGe:AUTO?
[SENSe:] | SENSe1: | SENSe2:
VOLTage[:DC]:RESolution {<
resolution > | MIN | MAX}
VOLTage[:DC]:RESolution? [MIN | MAX]
[SENSe:] | SENSe1: | SENSe2:
VOLTage[:DC]:NPLCycles {0.02 | 0.2 | 1 | 2 | 10 | 20 | 100 | 200 | MIN | MAX}
VOLTage[:DC]:NPLCycles? [MIN | MAX]
[SENSe:] | SENSe1: | SENSe2:
VOLTage[:DC]:NULL[:STATe] {OFF | ON}
VOLTage[:DC]:NULL[:STATe]?
VOLTage[:DC]:NULL:VALue {<
value > | MIN | MAX}
VOLTage[:DC]:NULL:VALue?
ROUTe
:TERMinals {FRONt | FRONt1 | FRONt2}
:TERMinals?
1
<channel> is one of: {FRONt | FRONt1 | FRONt2 | 1 | 2}
Chapter 4 Remote Interface Reference
Command Summary
118