• Front-panel operation: enable readings storage under the
1: RDGS STORE command in the SYStem menu. The ‘Mem’
annunciator lights in the display.
Recall the stored readings under the 2: SAVED RDGS command in the
SYStem menu. Press
Shift > (Menu Recall) after enabling reading
memory to quickly go to the Saved Readings command.
Reading memory is automatically turned off when you go to the
“parameter” level in the menu to recall the readings.
• Remote interface operation: The INITiate command uses reading
memory to store readings prior to a FETCh? command. You can query
the number of stored readings in memory by sending the
DATA:POINts? command from the remote interface.
3
Chapter 3 Features and Functions
System-Related Operations
91
To Next Page
Loading...
