5-26 Agilent 4155C/4156C User’s Guide Vol.1, Edition 11
Print/Plot Function
Saving Setup Data Lists
3. Enter the file name in the FILE NAME entry field.
To save a file to a diskette in the built-in flexible disk drive, the file name must
be:
• a maximum of 8 characters for DOS format
• a maximum of 6 characters for HP LIF format (Do not use "_" as the last
character of the filename.)
To save a file to the network drive, the file name can be a maximum of 36
characters. The file name and directory path can be a maximum of 58 characters.
4. To set the LANGUAGE, select PCL, HR PCL, or HP-GL softkey.
If you select the PCL or HR PCL mode, ignore the RESOLUTION setting. The
text font size depends on the printer you use.
5. To specify the OUTPUT PAGE, select one of the following softkeys.
CURRENT Selects the currently displayed setup screen.
GROUP Selects the screen group that includes the currently
displayed setup data.
ALL Selects all the setup screens.
6. If you select HP-GL, set the OUTPUT REGION. There are two available fields:
UPPER LEFT Specifies the position of the upper-left corner of the printed
or plotted hard copy.
LOWER RIGHT Specifies the position of the lower-right corner of the
printed or plotted hard copy.
Select one of the following softkeys, or enter a value using the keyboard or the
ENTRY keys on the front panel. These softkeys are available for each OUTPUT
REGION field.
WHOLE Sets the output region as the entire sheet.
UPPER LEFT Sets the output region to the upper-left quarter of the paper.
UPPER RIGHT Sets the output region to the upper-right quarter of the
paper.
LOWER LEFT Sets the output region to the lower-left quarter of the paper.
LOWER RIGHT Sets the output region to the lower-right quarter of the
paper.
To Next Page
Loading...
Need help?
General
