About This Guide
x Getting Started Guide
Chapter 5 Setting Up the Software for a Measurement —
Explains how to access and use the metrology software. It also explains
how to set up the software for a measurement.
Chapter 6 Making the Measurement —
Explains how to use the metrology software to make a measurement and
collect data.
Chapter 7 Analyzing, Transferring, and Printing Measurement
Data —
Explains how to use data you collected during the measurement.
Chapter 8 Ensuring Repeatability, Accuracy, and Resolution —
Explains how you can ensure your measurements are as consistently
accurate as possible.
Chapter 9 Troubleshooting and Maintenance —
Provides instructions for user-level troubleshooting and routine
maintenance, such as cleaning the optics.
Glossary — Defines terms used in this guide.
Index
To Next Page
Loading...
