114 Operation Manual
7 Resource Conservation
g
When prompted, select the desired wake function,
press [Enter], then input the event time. Press [Enter].
(See step 2 for descriptions of the wake functions.)
h Repeat steps b through g as needed for any other days
of the week.
You do not have to program events for every day. For
example, you can program the GC to sleep on Friday
evening, then wake on Monday morning, keeping it
continuously at operating conditions during weekdays.
You can also use the Instrument Schedule to program an
Adjust Offset function for an NPD, if installed. This function
is useful for automatically preparing the NPD for use each
day.
See also “To Create or Edit a Sleep, Wake, or Condition
Method” on page 116.
Actual Setpoint
INST SCHEDULE ( 2 of 2)
Monday: 07:30<
Type: Wake with WAKE file.
To Next Page
Loading...
Need help?
General
