aurora
Sonata
Hand Held ISDN Tester—User Guide
4-40 427869
Setting up the Outgoing Channel test details
To change the operation of the Outgoing Channel component:
-1- In the Channel component display screen,
highlight Outgoing Channel and press the
Setup function key.
-2- To choose the bearer service for the test calls:
• Select Service.
• Highlight the service you require and press
ENTER to close the option window.
-3- You can perform a local test (to the exchange)
or a distant test (to a remote user).
• Select Destination.
• Highlight either Local or Distant and
press ENTER to close the option window.
For a distant test you need to enter the number of the remote
device. When you select Distant, the CPN and (ETSI only)
SUB settings are added to the setup menu.
To Next Page
Loading...
Need help?
General
