Issue 2 - 07/00 3-25
First Steps in Testing - Section 1
Note
You can also access the Dial Options menu when you are
setting up an outgoing call. See Setting up information for
specific tests in section 2.
CLI/COL Allows you to test the CLIP/R and COLP/R
supplementary services.
CPN type/plan The numbering type and plan for the Called
Party Number.
SPC Call Allows you to use a Semi-Permanent
Connection.
UUI Allows you to test the User to User Signalling
(UUS) supplementary service.
CUG Allows you to test the Closed User Groups
(CUG) supplementary service.
Note
The instructions for testing CLIP/R, COLP/R, UUS and CUG
are in Chapter 4 section 5 along with the other ISDN
supplementary services.
Using a Semi-Permanent Connection
You can set up the call on a Semi-Permanent Connection
(SPC)—this is a connection which is kept up unless specifically
deactivated. (Because it can be deactivated and reactivated, an
SPC is not the same as a fixed link.)
-1- From the Dial Options menu, select SPC Call.
To Next Page
Loading...
Need help?
General
