150 Chapter 3
Mode
Stimulus / Response
Mode
Stimulus / Response
Selects the Stimulus/ Response measurement mode for your analyzer. The Stimulus
Response mode includes several pre-configured measurements and enables you to use the
Meas key to select one-button measurements such as, Two-Port Insertion Loss, One-Port
Insertion Loss
, Return Loss, or Distance to Fault.
When you press the Stimulus / Response mode key, a menu of available Stimulus/Response
measurements is displayed. Once you are in a Stimulus Response measurement, you can
change to a different Stimulus Response measurement by pressing
Meas and then
selecting the desired measurement.
Mode All
Remote Command :CONFigure:<meas_name>
:CONFigure?
Example :CONF:TPILoss sets the analyzer to the Two Port Insertion
Loss measurement.
State Saved Saved in instrument state.
Key Path
Mode, Stimulus / Response
To Next Page
Loading...
