220 Chapter 3
Mode
Return Loss
Mode
Display Show/Blank
This key lets you make a trace visible or not. In
Blank, traces do not display nor appear on
printouts but are otherwise unaffected. They may be queried and markers may be placed
on them.
Note that the action of putting a trace in
Blank does not restart the sweep and does not
restart averaging or hold functions for any traces.
Dependencies / Couplings • Setting the trace type (even to the type it was already in) puts
the trace in
Show
• Loading a trace from a file puts that trace in Show regardless of
the state it was in when it was saved.
Preset
Show for Trace 1; Blank for 2
State Saved saved in Instrument State
Key Path
Trace/Detector, Display Show/Blank
To Next Page
Loading...
