EasyManua.ls Logo

Agilent Technologies N1996A-503 - Page 240

Agilent Technologies N1996A-503
366 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
240 Chapter 3
Mode
Distance To Fault
Mode
Span: 1st Segment Left
Sets the frequency span for the 1
st
segment to the Left of the Center segment. This key is only
available when
1st has been selected with the Segments key.
Span: 1st Segment Right
Sets the frequency span for the 1
st
segment to the Right of the Center segment. This key is only
available when
1st has been selected with the Segments key.
Notes
Key is only displayed when the selected segment is 1
st
, and the
selected segment side is Right.
Dependencies /
Couplings
Value is displayed on the key in the currently selected Y Axis
Unit.
Preset Not affected by a preset
State Saved Saved in instrument state.
Min –10 dB
Max 150 dB
Key Path
Meas Setup, Limit Masks, Limit Mask 1, 1st Segment: Right Level
Default Unit dB
Mode Stimulus / Response
Notes
Key is only displayed when the selected segment is 1
st
, and the
selected segment side is Left.
Dependencies /
Couplings
If the Center, 1
st
, and 2
nd
segments are On, the left 2
nd
segment
span adjusts on a change in the left 1
st
segment span.
Preset Not affected by a preset but set per default to 20 m (meters)
after a power cycling.
State Saved Saved in instrument state.
Key Path
Meas Setup, Limit Masks, Limit Mask 1, 1st Segment: Left Span
Default Unit m (meters) if the “Unit” parameter is set to “Meter”
ft. (feet) if the “Unit” parameter is set to “Feet”
Mode Stimulus / Response

Table of Contents

Related product manuals